NI PXI-2514 4x16高密度矩陣開關模塊
1.產 品 資 料 介 紹：
中文資料：
NI PXI-2514是一款4x16高密度矩陣開關模塊，具有以下配置說明、功能作用和應用領域：
配置說明：
- 通道數：4個輸入通道和16個輸出通道。
- 插孔類型：使用SCSI-68連接器與外部設備連接。
- PXI總線接口：與PXI總線連接，通過PXIe接口與其他儀器和設備進行通信。
功能作用：
- 信號路由：PXI-2514可以實現高速和精確的信號路由，將輸入信號從四個通道路由到16個輸出通道之一。這對于測試和測量應用中需要對多個測試點進行切換的場景非常有用。
- 高密度：通過提供4x16的矩陣架構，PXI-2514實現了高密度的信號路由，可以在一個緊湊的模塊中處理大量的信號路由需求。
- 快速切換：PXI-2514支持快速切換時間，可在微秒級別內完成信號路由切換，適用于需要快速切換不同信號源或測量點的應用。
應用領域：
- 自動測試系統（ATE）：PXI-2514可作為ATE系統中的一部分，用于信號切換和路由，以實現對被測設備或電路的自動測試。
- 通信測試：在通信領域，PXI-2514可用于信號路由和切換，例如在無線電頻率測試中，切換不同的天線或信號源。
- 傳感器測試：用于測試和校準傳感器陣列時，PXI-2514可用于將輸入信號路由到不同的傳感器或測量通道。
- 數據采集系統：在數據采集系統中，PXI-2514可用于切換和路由不同的輸入信號，以便實現對多個數據源或傳感器的數據采集和分析。
英文資料：
NI PXI-2514 is a 4x16 high density matrix switch module, which has the following configuration instructions, functions and application fields:
Configuration instructions:
Number of channels: 4 input channels and 16 output channels.
Jack type: Use SCSI-68 connectors to connect to external devices.
PXI bus interface: Connected to the PXI bus and communicates with other instruments and devices through the PXIE interface.
Function:
Signal routing: PXI-2514 can achieve high-speed and precise signal routing, routing input signals from four channels to one of the 16 output channels. This is very useful for scenarios where multiple test points need to be switched in testing and measurement applications.
High density: By providing a 4x16 matrix architecture, PXI-2514 achieves high-density signal routing, which can handle a large number of signal routing requirements in a compact module.
Fast switching: PXI-2514 supports fast switching time and can complete signal routing switching within microseconds, suitable for applications that require quick switching of different signal sources or measurement points.
Application field:
Automatic Test System (ATE): PXI-2514 can be used as a part of the ATE system for signal switching and routing to achieve automatic testing of the tested equipment or circuit.
Communication testing: In the field of communication, PXI-2514 can be used for signal routing and switching, such as switching different antennas or signal sources in radio frequency testing.
Sensor testing: When used to test and calibrate sensor arrays, PXI-2514 can be used to route input signals to different sensors or measurement channels.
Data acquisition system: In a data acquisition system, PXI-2514 can be used to switch and route different input signals, in order to achieve data acquisition and analysis of multiple data sources or sensors.
2.產 品 展 示
3.主 營 品 牌
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.club-sunny.com
